Honeywell Fire-Lite ES-200X Series

The ES-200X, ES-200XC, ES-200XI, and ES-200XP are the latest intelligent addressable Fire Alarm Control Panel (FACP) from Fire•Lite Alarms and is a direct replacement for the MS-9200UDLS. The ES- 200X support up to 198 addressable devices (99 detectors and 99 modules). With an extensive list of powerful features, the ES-200X Series programs just like Fire•Lite’s other addressable products, yet fits into applications previously served only by conventional panels.

The ES-200X and ES-200XC feature a pre-installed IPOTS-COM, a dual technology (POTS and IP) communicator. The POTS transmits system status (alarms, troubles, AC loss, etc.) to a Central Station via the public switched telephone network. The IP communicator’s inter- net monitoring capability sends alarm signals over the Internet saving the monthly cost of two dedicated business telephone lines. Although not required, the secondary telephone line may be retained providing backup communication over the public switched telephone line. Optional cellular reporting is available using an HW-TG7F Series Communicators or the CLSS Pathway.

The ES-200XP features an integrated CLSS Pathway Pro Communi- cator, a dual-SIM (AT&T/ Verizon) 5G LTE-M Communicator with optional IP connection. The CLSS Pathway Pro transmits system sta- tus (alarms, troubles, AC loss, etc.) to the Central Station using LTE CAT-M1 networks, serving as a bridge between the fire system and the CLSS Cloud. The IP communicator’s Internet monitoring capability sends alarm signals over the Internet, meeting requirements for backup communication. As an integrated communicator, the CLSS Pathway Pro, typically, can transmit data faster than dial capture meth- ods.

Remote and local programming of the control panel is possible using the FS-Tools Upload/Download utility. Programming databases can be uploaded/downloaded via the panel’s USB port (and USB cable) or via an ethernet connection using the IPOTS-COM communicator (ES-200X and EX-200XC only). The USB port also allows for the download or upload of the entire program, history file, walk-test data, current status and system voltages by means of a USB flash drive.

The power supply and all electronics are contained on a circuit board supported on a new quick install chassis and housed in a metal cabi- net. Available accessories include local and remote upload/download software, remote annunciators, and reverse polarity/city box transmit- ter (4XTMF).

Features

• Listed to UL Standard 864, 10th edition
• Pre-installed IPOTS-COM Ethernet IP and POTS (Plain Old Telephone Service) Central Station Communicator (ES-200X and EX-200XC only)
• Optional Cellular Central Station Communicators over AlarmNet® (ES-200X and EX-200XC only)
• Integrated CLSS Pathway Pro Communicator; dual SIM AT&T/Veri- zon networks with LTE-CAT-M1 5G technology (EX-200XP only)
• Cloud monitoring using Honeywell’s Connected Life Safety Services (CLSS) Cloud solutions software (EX-200XP only)
• Automated activation of the ECC-50/100 Emergency Command Center
• ECC-FFT Firefighter T elephone option
• Compatible with SWIFT® wireless devices
• Auto-programming (learn mode) reduces installation time. Reports two devices set to the same address
• Four built-in, independently programmable, Class A or Class B NAC circuits
• Selectable strobe synchronization for System Sensor, Wheelock, and Gentex devices
• Notification Appliance Circuit End of Line resistor matching
• Four programmable function keys for ease of maintenance
• Two programmable relays and one fixed trouble relay
• Built-in Programmer
• Integral 80-character LCD display with backlighting
• Real-time clock/calendar with automatic daylight savings control
• History file with 1,000 event capacity
• Addressable sounder base compatibility
• Multi-criteria detector (smoke, heat, CO) with programmable response
• Control module delay timer
• Automatic detector sensitivity testing (NFPA 72 compliant)
• Automatic device type-code verification
• Point trouble identification
• Waterflow selection per module point
• Alarm verification selection per detector point
• Maintenance alert warns when smoke detector dust accumulation is excessive
• One-person audible or silent walktest with walktest log and printout
• System alarm verification selection per detector point
• PAS (Positive Alarm Sequence) and Pre-signal per point (NFP A 72 compliant)
• Up to 16 ANN-BUS annunciators- 8 per each ANN-Bus
• Remote Acknowledge, Alarm Silence, Reset and Drill via addressable modules or remote annunciator
• Upload/Download of program and data via USB with optional FS-Tools Programming Utility