COMMERCIAL FIRE SYSTEMS A&E

 Honeywell Farenhyt Intelligent Fire Alarm Control Panel IFP-300 / IFP-300B 

 The IFP-300 (red) and IFP-300B (black) are intelligent analog/addressable Fire Alarm Control Panels (FACP). The basic IFP-300 panel contains one built in signaling line circuit (SLC), which can support 159 IDP/SK sensors and 159 IDP/SK modules or 127 SD devices per loop. Additional SLC loops can be added using the model 6815 SLC expander for System Sensor devices to increase the overall point capacity to a maximum of 300 points per panel, or model 5815XL for Hochiki devices to increase the overall point capacity to a maximum of 254 points per panel. 

IFP-300 has the interconnection capability for up to 32 panels. The system has two modes of operation, multiple panels covering one larger building, or multiple independent buildings. To network panels together use the SK-NIC network interface card. Copper wire or fiber optic cable panel connectivity can be used within the same networked system. 

IFP-300 has a built-in dual phone line, digital alarm communicator/ transmitter (DACT), IP or optional cellular technologies, Form C trouble relay, and two programmable Form C relays. IFP-300 has powerful features such as detector sensitivity, day/night thresholds, drift compensation, pre-trouble maintenance alert, and calibration trouble alert. 

The IFP-300 supports a variety of devices, including RA- 2000, RA-1000 or RA-100 remote annunciator, 5824 serial/ parallel printer interface module (for printing system reports).  View or download the IFP300 spec sheet.  View or download the IFP300 Basic Operating Instructions.

 Honeywell Farenhyt Intelligent Fire Alarm Control PanelIFP-75 / IFP-75B

The IFP-75 (red) and IFP-75B (black) are intelligent addressable fire alarm control panels (FACP). IFP-75 has a single line circuit (SLC) loop for connecting addressable detectors, which can support 75 System Sensor ® IDP/SK sensors and 75 IDP/SK modules or 75 Hochiki® SD devices per loop. For IDP or SK devices the overall point capacity to a maximum of 150 points per panel, or for SD devices the overall point capacity to a maximum of 75 points per panel.

IFP-75 has the interconnection capability for up to 32 panels. The system has two modes of operation, multiple panels covering one larger building, or multiple independent buildings. To network panels together use the SK-NIC network interface card. Copper wire or fiber optic cable panel connectivity can be used within the same networked system.

IFP-75 has a built-in dual-line digital and IP communicator with an optional cellular communication module, Form C trouble relay, and two programmable Form C relays. IFP-75 has powerful features such as detector sensitivity, day/night thresholds, drift compensation, pre-trouble maintenance alert, and calibration trouble alert.

The IFP-75 supports a variety of devices, including RA-2000, RA-1000 or RA-100 remote annunciator, 5824 serial/parallel

printer interface module (for printing system reports), RPS-1000 power module, and IDP, SK, SWIFT wireless or SD devices.   View or download the IFP75 spec sheet.

Honeywell Farenhyt Scalable Analog/Addressable Fire Alarm Control ECS System IFP-2100ECS / IFP-2100ECSB 

 The IFP-2100ECS (red) and IFP-2100ECSB (black) are intelligent analog/addressable Fire Alarm Control Panels combined with an Emergency Communication System (ECS). When the ECS features are enabled, they are integrated with the fire alarm and voice evacuation functions of the control panel. The IFP-2100ECS panel and accessories provide features to meet the requirements for Mass Notification Systems as described in UL 2572. 

This state of the art fire alarm control panel allows you to choose one of three SLC protocols per system. The IFP-2100ECS panel contains one built in signaling line circuit (SLC), which can support 159 IDP/SK sensors and 159 IDP/SK modules or 127 SD devices per loop. Additional SLC loops can be added using the model 6815 SLC expander for System Sensor devices or model 5815XL for Hochiki devices to increase the overall point capacity to a maximum of 2100 points per panel. 

IFP-2100ECS has the interconnection capability for up to 32 panels. The system has two modes of operation, multiple panels covering one larger building, or multiple independent buildings. A seperate network can be used for voice paging across all panels. 

The IFP-2100ECS supports a variety of devices, including RA- 2000, RA-1000 or RA-100 remote annunciator, 5824 serial/ parallel printer interface module (for printing system reports), RPS-1000 power module, and IDP, SK or SD devices.  View or download the IFP-2100ECS spec sheet. View or download the IFP-2100ECS Basic Operating Instructions.

Honeywell Farenhyt Emergency Communication System with Fire Alarm Control Panel IFP-300ECS

The IFP-300ECS (red) and IFP-300ECSB (black) are Intelligent analog/addressable fire alarm control panels (FACP) combined with an Emergency Communication System (ECS). When the ECS features are enabled, they are integrated with the fire alarm and voice evacuation functions of the control panel. The IFP-300ECS panel and accessories provide features to meet the requirements for Mass Notification Systems as described in UL 2572.

This state of the art fire alarm control panel allows you to choose one of three SLC protocols per system. The basic IFP-300ECS panel contains one built in signaling line circuit (SLC), which can support 159 System Sensor® IDP/SK sensors and 159 IDP/SK modules or 127 (SD) Hochiki® devices per loop. Additional SLC loops can be added using the model 6815 SLC expander for IDP/SK devices to increase the overall point capacity to a maximum of 300 points per panel, or model 5815XL SLC Expander for SD devices to increase the overall point capacity to a maximum of 254 points per panel.

IFP-300ECS has the interconnection capability for up to 32 panels. The system has two modes of operation, multiple panels covering one larger building, or multiple independent buildings. A separate network can be used for voice paging across all panels. The IFP-300ECS supports a variety of devices, including RA- 2000, RA-1000 or RA-100 remote annunciator, 5824 serial parallel printer interface module (for printing system reports), RPS-1000 power module, and IDP, SK or SD devices.  View or download the IFP-300ECS spec sheet.

Honeywell Silent Knight Intelligent 50 Watt Amplifier

The ECS-50W is an intelligent 50 watt amplifier for use with the IFP-100ECS, IFP-1000ECS and IFP-2000ECS. The ECS-50W is used to amplify the audio message for distribution throughout the facility. Since it is designed as a self-contained distributed amplifier it can be conveniently located near the area of protection to reduce wiring demands. Each ECS-50W is capable of producing 50-watts of audio power. Up to eight ECS-50W’s can be used on the voice evacuation system. The ECS-50W has its own power supply with battery backup and four speaker circuits which can be expanded to eight speaker circuits with the optional ECS-CE4. The ECS-50W is fully supervised by the main panel for trouble conditions. View or download the ECS-50W spec sheet.

Honeywell Silent Knight Intelligent 125 Watt Amplifier

The ECS-125W is an intelligent 125 watt amplifier for use with the IFP-100ECS, IFP-1000ECS and IFP-2000ECS. The ECS-125W is used to amplify the audio message for distribution throughout the facility.  Since it is designed as a self-contained distributed amplifier it can be conveniently located near the area of protection to reduce wiring demands. Each ECS-125W is capable of producing 125-watts of audio power. Up to eight ECS-125Ws can be used on the voice evacuation system. The ECS-125W has its own power supply with battery backup and four speaker circuits which can be expanded to eight spe aker circuits with the optional ECS-CE4. The ECS-125W is fully supervised by the main panel for trouble conditions. View or download the ECS-125W spec sheet.

Honeywell Fire•Lite MS-9600LS(E)/MS-9600UDLS(E) Intelligent Addressable FACP with Optional 2nd Loop

Fire•Lite’s MS-9600LS(E) and MS-9600UDLS(E) are compact, cost effective, intelligent addressable FACPs (Fire Alarm Control Panels) with an extensive list of powerful features. The combination of Fire•Lite’s newer series devices and legacy 300 Series devices, along with the MS-9600LS(E) or MS-9600UDLSE FACP, offer the latest in fire protection technology.

LiteSpeed™ is a patented technology that polls 10 devices at a time looking for new or different information. When new information is found at a specific address, the system polls that device several times for any new data. This improvement allows a fully loaded panel with up to 636 devices to report an incident and activate the notification circuits in under 10 seconds. View or download the MS-9600LS(E) spec sheet.

Honeywell Fire•Lite MS-9200UDLS(E) Rev 3 Intelligent Addressable FACP with Built-In Communicator

The Fire•Lite MS-9200UDLS Rev 3 with Version 5.0 firmware is a combination FACP (Fire Alarm Control Panel) and DACT (Digital Alarm Communicator/Transmitter) all on one circuit board. This compact intelligent addressable control panel has an extensive list of powerful features. While the MS-9200UDLS Rev 3 may be used with an SLC configured in the CLIP (Classic Loop Interface Protocol) mode, it can also operate in LiteSpeed™ mode—Fire•Lite’s latest polling technology—for a quicker device response time. LiteSpeed’s patented technology polls 10 devices at a time. This improvement allows a fully-loaded panel with up to 198 devices to report an incident and activate the notification circuits in under 10 seconds. With Litespeed polling, devices can be wired on standard twisted, unshielded wire up to a distance of 10,000 feet.   View or download the MS-9200UDLS(E) spec sheet.

Honeywell Fire•Lite ECC-50/100C Emergency Command Center

Fire-lite’s ECC-50/100C is a multipurpose emergency voice evacuation panel for fire applications, mass notification  applications, or both. The Primary Operating Consoles (POC’s)delivers 50 or 100 watts of audio power for distribution to up to eight speaker circuits (i.e. zones). The ECC-50/100C comes standard with a single speaker circuit and a built-in 25Vrms, 50 watt amplifier. A secondary 50 watt amplifier (ECC-50W-25/70V) can be added for single speaker circuit backup or to increase system capacity to two speaker circuits and an additional 50 watts of audio power. An optional ECCCE6 module added to the ECC-50/100C will upgrade the system to a maximum of eight speaker circuit outputs. All speaker output circuits can be wired in either Class B or Class A configuration. The ECC-50/100C has fourteen field programmable messages (up to 60 seconds each), built-in field configurable pre- and post-announce tone generators and a fully supervised Notification Appliance Circuit (NAC) with 2.0 amps of synchronized NAC power.   View or download the ECC50/100C spec sheet.

Honeywell Silent Knight Remote Annunciator RA-2000

Honeywell Silent Knight Remote Annunciator RA-100

Honeywell FarenytLocal Operator Control ECS-LOC2100/ECS-LOC2100B

Honeywell Silent Knight Supervised Remote Command Unit ECS-RCU2000

Honeywell Silent Knight Remote Paging Unit

The ECS-RPU is a remote paging unit that provides a supervised microphone, 8 emergency message buttons, and 16 mappable audio switches. With dimensions of 17 ¾” x 11 7/16” x 3 ½”, this lower profile remote paging unit is ideal for locations where the standard LOC won’t fit. The RA-2000 and RA-100 have the same height and flush mount depth as the ECS-RPU so if your installation requires a fully functioning LOC with annunciation the RA-2000 or RA-100 can be installed right next to the ECS-RPU for a sleek installation. View or download the ECS-RPU spec sheet.

Honeywell Fire-Lite LCD-80F Fire Alarm Annunciator (with frame)

The LCD-80F is a compact, cost-effective, 80-character, backlit LCD remote Fire Annunciator for use with the Fire•Lite MS-9200UD Series and MS-9600 Series Fire Alarm Control Panels (FACPs). The LCD-80F displays complete system point status information and includes control switches for remote control of critical system functions. Up to 32 LCD-80Fs may be connected onto the EIA-485 terminal port of each FACP. The LCD-80F requires no programming, which saves time during system commissioning.  View or download the LCD-80F spec sheet.

Honeywell E3Point

E³Point is capable of detecting the widest range of toxic and combustible gases found in commercial building spaces and outbuildings, including CO, NO2, O2, H2, H2S, CH4 and C3H8. It can be used as a standalone unit with single or dual-gas detection (i.e. using a remote sensor) or deployed as a networkable device (interoperable with BACnet, Modbus or other Building Automation System); E³Point also functions with existing controller-based gas monitoring systems and wired-wireless gas monitoring system components.   View or download the E3Point spec sheet.

FAAST XS Fire Alarm Aspiration Sensing Technology®

FAAST  Fire Alarm Aspiration Sensing Technology®

Honeywell Silent Knight Addressable IDP-Beam

Open-area Smoke Imaging Detection 

 (OSID) by Xtralis is a new innovation in projected beam smoke detection technology. By using advanced dual wavelength projected beams and optical imaging technology for early warning smoke detection, OSID provides a low-cost, reliable and easy-to-install solution that overcomes typical beam detection issues such as false alarm incidents and alignment difficulties. View or download the OSID spec sheet.

Honeywell Wireless Smoke CO Detector 5800COMBO

 Multi-threat detection. Honeywell’s 5800COMBO is the industry’s first professionally monitored, wireless, combination Smoke and Carbon Monoxide (CO) detector designed to help protect people and property. 

Using four sensing elements, the 5800COMBO provides true multi-threat detection and reacts fast to real danger—while helping to reduce false alarms. A photo-electric chamber senses airborne smoke particulates while an electro-chemical sensor monitors the CO bi-product produced by slow smoldering fires. 

Reduced risk. The Honeywell detector also features infrared (IR) flame sensing that measures ambient light levels and flame signatures, while thermal detection monitors temperature. Sophisticated and trusted algorithms interpret and respond to multiple inputs and provide the false alarm immunity expected in the most critical applications. Automatic drift compensation of Smoke and CO sensors accommodates for dust build-up over time. Additionaly, the reliable electro-chemical sensor has a 10-year lifespan. 

Safety you can see and hear. Audible annunciation is provided by a built-in 85 dB piezo sounder with a one-inch voice speaker that supports multi-language alarm feedback. A prominent, 360° viewable LED shows visual alerts. A smoke alarm condition illuminates red, a CO alarm condition illuminates blue, and a tri-color status LED intuitively indicates the operating mode.  View or download the 351180-A spec sheet.

Honeywell Farenhyt SWIFT Wireless System Gateway WIPD-WGI

SWIFT® Wireless System can be applied in many situations that are problematic for traditional wired devices. In cases where areas of a building are difficult or impossible to wire, visually sensitive, or have restricted access, SWIFT wireless sensors provide an efficient, reliable solution. SWIFT wireless devices communicate via a proprietary wireless mesh protocol to communicate with a Honeywell Farenhyt Series fire alarm system by means of a SWIFT Wireless Gateway (WIDP-WGI). The SWIFT Gateway connects to the SLC loop of the IFP-75, IFP-300, IFP- 300ECS, IFP-2100 or IFP-2100ECS panels using IDP protocol.

Wireless devices in a SWIFT network develop “parent-child” communication links with other devices in the mesh, so that a message originating from a remote device “hops” to the closest parent device, and then to successive parent devices until the message reaches gateway. Alternate paths are also identified and supervised by the SWIFT protocol providing approved Class A wireless communication. If a device does not have an established communication path with adequate signal strength, an additional device such as a wireless module may be installed in between so that it will act as a repeater. The WIDP-WGI supports up to 50 devices: 1 SWIFT Gateway and up to 49 wireless detectors and monitor modules. View or download the WIPD-WGI spec sheet.

Honeywell Farenhyt SWIFT Intelligent Wireless Detectors

Farenhyt SWIFT® wireless detectors are intelligent (addressable detectors which provide secure, reliable communication to the Fire Alarm Control Panel (FACP) across a Class A mesh network. Wireless detectors create an opportunity for applications where it is costly (concrete walls/ceilings, buried wires), obtrusive (surface mount conduit), or possibly dangerous (asbestos) to use traditional wired devices. In addition, both wired and wireless devices can be present on the same FACP providing an integrated wired-wireless solution for increased installation potential.

The SWIFT detection line includes a photoelectric, photo/thermal, standard fixed heat, and rate-of-rise heat detectors. The photoelectric detectors transmit a digital representation of smoke density through a wireless mesh to a gateway and on to a FACP. The photo/thermal detectors combine a photoelectric chamber and a 135°F fixed temperature heat detector. The fixed heat detector and rate-of-rise detectors utilize sensors designed for open area protection with 50 foot spacing capability as approved by UL 521.

All sensors offer addressable code wheels and two LEDs. The LEDs are controlled by the panels. Operation modes include red, green, and amber colors with various solid or blink patterns.The mesh network within the SWIFT system creates a child-parent relationship between the devices so that each device has two parents providing a second path for communications on every device. If one device can no longer operate for any reason, the rest of the devices can still communicate with each other, directly or through one or more intermediate devices. The SWIFT system also engages frequency hopping to prevent system interference whether intentional or accidental. View or download the SWIFT wireless detectors spec sheet.

Honeywell Farenhyt SWIFT Intelligent Wireless Modules

SWIFT® wireless modules are intelligent addressable modules which provide secure, reliable communication to the Fire Alarm Control Panel (FACP) across a Class A mesh network. Wireless modules create an opportunity for applications where it is costly (concrete walls/ceilings, buried wires), obtrusive (surface mount conduit), or possibly dangerous (asbestos) to use traditional wired devices. In addition, both wired and wireless devices can be present on the same FACP providing an integrated wired-wireless solution for increased installation potential.

The mesh network within the SWIFT system creates a childparent relationship between the devices so that each device has two parents providing a second path for communications on every device. If one device can no longer operate for any reason, the rest of the devices can still communicate with each other, directly or through one or more intermediate devices.

The SWIFT system also engages frequency hopping to prevent system interference whether intentional or accidental. The SWIFT monitor module is intended for use with a wireless gateway to interface with a device having contacts used to signal status conditions. It is designed to provide an interface to contact devices such as security contacts, waterfl ow switches, or pull stations. The input to the monitor module is non-latching and does not require a reset. The device has a panel controlled LED indicator. The monitor module must be within 3- feet of the monitored device when using field wiring or 20 feet in nonmetallic conduit. View or download the SWIFT Wireless Modules spec sheet.

Honeywell Farenhyt SWIFT Wireless Pullstation WIDP-PULL-DA

The Honeywell® SWIFT® addressable pull station is a dual-action, manual pull station with a key-lock reset feature that provides one addressable alarm initiating input. The pull station features similar aesthetic design and durable construction characteristics as the wired counterpart to blend seamlessly throughout the environment. The device communicates to the FACP through the SWIFT mesh network and gateway, and is powered by 4 batteries offering a 2-year, UL listed battery life.

Installation is fast and straightforward by using a mounting plate that can be surface mounted. Once the mounting plate is firmly attached to the wall, the pull station is snapped into place and locked down with 3 screws.

The mechanical operation is simple and easy to use in an emergency with a PUSH IN/PULL DOWN handle that latches in the down  position to clearly indicate the station has been operated while the word “ACTIVATED” appears on top of the handle in bright yellow, further indicating the operation of the station.

The wireless pull station meets the Americans with Disabilities Act Accessibility Guidelines’ (ADAAG) controls and operating mechanisms guidelines (section 4.1.3[13]) and the Americans with Disabilities Act (ADA) requirement for a 5-pound maximum pull force to activate the pull station and conforms to ANSI/UL Standard 38.

The SWIFT wireless system offers intelligent (addressable) devices which provide secure, reliable communication to the Fire Alarm Control Panel (FACP) across a Class A mesh network. Wireless devices create an opportunity for applications where it is costly (concrete walls/ceilings, buried wires), obtrusive (surface mount conduit), or possibly dangerous (asbestos) to use traditional wired devices. In addition, both wired and wireless devices can be present on the same FACP providing an integrated wiredwireless solution for increased installation potential. . View or download the SWIFT Pullstation spec sheet.

Honeywell Advanced Multi-Criteria Fire/CO Detector IDP-FIRE-CO

The IDP-FIRE-CO is a plug-in, addressable device that provides both fire and carbon monoxide (CO) detection. For fire, the detector combines four separate sensing elements in one unit (smoke, CO, light/flame, and heat) to sense multiple components of a fire. This approach enables enhanced sensitivity to real fire with heightened immunity to nuisance particulate. For CO, the detector’s electrochemical sensing cell creates a separate signal for life safety CO detection. View or download the 351180-A spec sheet.

Honeywell Silent Knight Fire Heat Detectors IDP-Heat-HT

Honeywell Silent Knight IDP-Photo & IDP-Photo-T

Honeywell Silent Knight Manual Pull Station IDP-Pull-DA

Honeywell Silent Knight Addressable IDP-Monitor

Honeywell Silent Knight Addressable IDP-Zone

Honeywell Silent Knight Addressable IDP-Monitor 2

The IDP-Monitor-2 is an addressable monitor module with two initiating circuits for use with Silent Knight IFP-series fire alarm control panels (FACPs). The IDP-Monitor-2 acts as an interface to contact devices, such as waterflow switches and pull stations. The IDP-Monitor-2 supports Class B supervised wiring to the load device. Conventional 4-wire smoke detectors can be monitored for alarm and trouble conditions. Because the IDP-Monitor-2 is capable of monitoring two separate Class B circuits, it is ideal for waterflow tamper switch and flow switch monitoring. View or download the IDP-Monitor 2 spec sheet.

Honeywell Silent Knight Addressable IDP-Relay

Honeywell iGSMCFP4G Internet and 4G Commercial Fire Communicator

Honeywell IP Internet & GSM (4G/3G/2G) Dual Path Communicator

L Series System Sensor Spec-alert Advance Series Strobes and Horn Strobes

System Sensor SpectrAlert Advance Series Outdoor Strobes and Horn Strobes